Journal Description
Materials
Materials
is an international peer-reviewed, open access journal on materials science and engineering published semimonthly online by MDPI. The Portuguese Materials Society (SPM), Spanish Materials Society (SOCIEMAT) and Manufacturing Engineering Society (MES) are affiliated with Materials and their members receive discounts on the article processing charges.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High Visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, Ei Compendex, CaPlus / SciFinder, Inspec, Astrophysics Data System, and other databases.
- Journal Rank: JCR - Q2 (Metallurgy & Metallurgical Engineering) / CiteScore - Q2 (Condensed Matter Physics)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 13.9 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our editors and authors say about Materials.
- Companion journals for Materials include: Electronic Materials and Construction Materials.
Impact Factor:
3.4 (2022);
5-Year Impact Factor:
3.8 (2022)
Latest Articles
Bulk MgB2 Superconducting Materials: Technology, Properties, and Applications
Materials 2024, 17(11), 2787; https://doi.org/10.3390/ma17112787 - 6 Jun 2024
Abstract
The intensive development of hydrogen technologies has made very promising applications of one of the cheapest and easily produced bulk MgB2-based superconductors. These materials are capable of operating effectively at liquid hydrogen temperatures (around 20 K) and are used as elements
[...] Read more.
The intensive development of hydrogen technologies has made very promising applications of one of the cheapest and easily produced bulk MgB2-based superconductors. These materials are capable of operating effectively at liquid hydrogen temperatures (around 20 K) and are used as elements in various devices, such as magnets, magnetic bearings, fault current limiters, electrical motors, and generators. These applications require mechanically and chemically stable materials with high superconducting characteristics. This review considers the results of superconducting and structural property studies of MgB2-based bulk materials prepared under different pressure–temperature conditions using different promising methods: hot pressing (30 MPa), spark plasma sintering (16–96 MPa), and high quasi-hydrostatic pressures (2 GPa). Much attention has been paid to the study of the correlation between the manufacturing pressure–temperature conditions and superconducting characteristics. The influence of the amount and distribution of oxygen impurity and an excess of boron on superconducting characteristics is analyzed. The dependence of superconducting characteristics on the various additions and changes in material structure caused by these additions are discussed. It is shown that different production conditions and additions improve the superconducting MgB2 bulk properties for various ranges of temperature and magnetic fields, and the optimal technology may be selected according to the application requirements. We briefly discuss the possible applications of MgB2 superconductors in devices, such as fault current limiters and electric machines.
Full article
(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
Open AccessArticle
Analysis of the Steelmaking Process via Data Mining and Pearson Correlation
by
Susana Carrasco-López, Martín Herrera-Trejo, Manuel Castro-Román, Fabián Castro-Uresti and Edgar Iván Castro-Cedeño
Materials 2024, 17(11), 2786; https://doi.org/10.3390/ma17112786 - 6 Jun 2024
Abstract
The continuous improvement of the steelmaking process is a critical issue for steelmakers. In the production of Ca-treated Al-killed steel, the Ca and S contents are controlled for successful inclusion modification treatment. In this study, a machine learning technique was used to build
[...] Read more.
The continuous improvement of the steelmaking process is a critical issue for steelmakers. In the production of Ca-treated Al-killed steel, the Ca and S contents are controlled for successful inclusion modification treatment. In this study, a machine learning technique was used to build a decision tree classifier and thus identify the process variables that most influence the desired Ca and S contents at the end of ladle furnace refining. The attribute of the root node of the decision tree was correlated with process variables via the Pearson formalism. Thus, the attribute of the root node corresponded to the sulfur distribution coefficient at the end of the refining process, and its value allowed for the discrimination of satisfactory heats from unsatisfactory heats. The variables with higher correlation with the sulfur distribution coefficient were the content of sulfur in both steel and slag at the end of the refining process, as well as the Si content at that stage of the process. As secondary variables, the Si content and the basicity of the slag at the end of the refining process were correlated with the S content in the steel and slag, respectively, at that stage. The analysis showed that the conditions of steel and slag at the beginning of the refining process and the efficient S removal during the refining process are crucial for reaching desired Ca and S contents.
Full article
(This article belongs to the Special Issue Metallurgical Process Simulation and Optimization—2nd Volume)
►▼
Show Figures
Figure 1
Open AccessArticle
Influence of Heat Treatment Condition on the Microstructure, Microhardness and Corrosion Resistance of Ag-Sn-In-Ni-Te Alloy Wire
by
Ling Shao, Shunle Zhang, Liepeng Hu, Yincheng Wu, Yingqi Huang, Ping Le, Sheng Dai, Weiwei Li, Na Xue, Feilong Xu and Liu Zhu
Materials 2024, 17(11), 2785; https://doi.org/10.3390/ma17112785 - 6 Jun 2024
Abstract
Ag-Sn-In-Ni-Te alloy ingots were produced through a heating–cooling combined mold continuous casting technique; they were then drawn into wires. However, during the drawing process, the alloy wires tended to harden, making further diameter reduction challenging. To overcome this, heat treatment was necessary to
[...] Read more.
Ag-Sn-In-Ni-Te alloy ingots were produced through a heating–cooling combined mold continuous casting technique; they were then drawn into wires. However, during the drawing process, the alloy wires tended to harden, making further diameter reduction challenging. To overcome this, heat treatment was necessary to soften the previously drawn wires. The study investigated how variations in heat treatment temperature and holding time affected the microstructure, microhardness and corrosion resistance of the alloy wires. The results indicate that the alloy wires subjected to heat treatment at 700 °C for 2 h not only exhibited a uniform microstructure distribution, but also demonstrated low microhardness and excellent corrosion resistance.
Full article
(This article belongs to the Special Issue Microstructure Engineering of Metals and Alloys, Volume II)
Open AccessArticle
Impact of Temperature Optimization of ITO Thin Film on Tandem Solar Cell Efficiency
by
Elif Damgaci, Emre Kartal, Furkan Gucluer, Ayse Seyhan and Yuksel Kaplan
Materials 2024, 17(11), 2784; https://doi.org/10.3390/ma17112784 - 6 Jun 2024
Abstract
This study examined the impact of temperature optimization on indium tin oxide (ITO) films in monolithic HJT/perovskite tandem solar cells. ITO films were deposited using magnetron sputtering at temperatures ranging from room temperature (25 °C) to 250 °C. The sputtering target was ITO,
[...] Read more.
This study examined the impact of temperature optimization on indium tin oxide (ITO) films in monolithic HJT/perovskite tandem solar cells. ITO films were deposited using magnetron sputtering at temperatures ranging from room temperature (25 °C) to 250 °C. The sputtering target was ITO, with a mass ratio of In2O3 to SnO2 of 90% to 10%. The effects of temperature on the ITO film were analyzed using X-ray diffraction (XRD), spectroscopic ellipsometry, and sheet resistance measurements. Results showed that all ITO films exhibited a polycrystalline morphology, with diffraction peaks corresponding to planes (211), (222), (400), (440), and (622), indicating a cubic bixbyite crystal structure. The light transmittance exceeded 80%, and the sheet resistance was 75.1 Ω/sq for ITO deposited at 200 °C. The optical bandgap of deposited ITO films ranged between 3.90 eV and 3.93 eV. Structural and morphological characterization of the perovskite solar cell was performed using XRD and FE-SEM. Tandem solar cell performance was evaluated by analyzing current density-voltage characteristics under simulated sunlight. By optimizing the ITO deposition temperature, the tandem cell achieved a power conversion efficiency (PCE) of 16.74%, resulting in enhanced tandem cell efficiency.
Full article
(This article belongs to the Topic Optical and Optoelectronic Properties of Materials and Their Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Ecologically Modified Leather of Bacterial Origin
by
Dawid Lisowski, Stanisław Bielecki, Stefan Cichosz and Anna Masek
Materials 2024, 17(11), 2783; https://doi.org/10.3390/ma17112783 - 6 Jun 2024
Abstract
The research presented here is an attempt to develop an innovative and environmentally friendly material based on bacterial nanocellulose (BNC), which will be able to replace both animal skins and synthetic polymer products. Bacterial nanocellulose becomes stiff and brittle when dried, so attempts
[...] Read more.
The research presented here is an attempt to develop an innovative and environmentally friendly material based on bacterial nanocellulose (BNC), which will be able to replace both animal skins and synthetic polymer products. Bacterial nanocellulose becomes stiff and brittle when dried, so attempts have been made to plasticise this material so that BNC can be used in industry. The research presented here focuses on the ecological modification of bacterial nanocellulose with vegetable oils such as rapeseed oil, linseed oil, and grape seed oil. The effect of compatibilisers of a natural origin on the plasticisation process of BNC, such as chlorophyll, curcumin, and L-glutamine, was also evaluated. BNC samples were modified with rapeseed, linseed, and grapeseed oils, as well as mixtures of each of these oils with the previously mentioned additives. The modification was carried out by passing the oil, or oil mixture, through the BNC using vacuum filtration, where the BNC acted as a filter. The following tests were performed to determine the effect of the modification on the BNC: FTIR spectroscopic analysis, contact angle measurements, and static mechanical analysis. As a result of the modification, the BNC was plasticised. Rapeseed oil proved to be the best for this purpose, with the help of which a material with good strength and elasticity was obtained.
Full article
(This article belongs to the Special Issue New Advances in Elastomer Materials and Its Composites)
Open AccessArticle
Axial Compressive Behaviours of Coal Gangue Concrete-Filled Circular Steel Tubular Stub Columns after Chloride Salt Corrosion
by
Tong Zhang, Hongshan Wang, Xuanhe Zheng and Shan Gao
Materials 2024, 17(11), 2782; https://doi.org/10.3390/ma17112782 - 6 Jun 2024
Abstract
The axial compressive behaviours of coal gangue concrete-filled steel tube (GCFST) columns after chloride salt corrosion were investigated numerically. Numerical modelling was conducted through the static analysis method by finite element (FE) analysis. The failure mechanism, residual strength, and axial load–displacement curves were
[...] Read more.
The axial compressive behaviours of coal gangue concrete-filled steel tube (GCFST) columns after chloride salt corrosion were investigated numerically. Numerical modelling was conducted through the static analysis method by finite element (FE) analysis. The failure mechanism, residual strength, and axial load–displacement curves were validated against tests of the coal gangue aggregate concrete-filled steel tube (GCFST) columns at room and natural aggregate concrete-filled steel tube (NCFST) columns after salt corrosion circumstance. According to the analysis on the stress distribution of the steel tube, the stress value of the steel tube decreased as the corrosion rate increased at the same characteristic point. A parametric analysis was carried out to determine the effect of crucial variation on residual strength. It indicated that material strength, the steel ratio, and the corrosion rate made a profound impact on the residual strength from the FE. The residual strength of the columns exposed to chloride salt was in negative correlation with the corrosion rate. The impact on the residual strength of the column was little, obvious by the replacement rate of the coal gangue. A simplified design formula for predicting the ultimate strength of GCFST columns after chloride salt corrosion exposure was proposed.
Full article
(This article belongs to the Topic Ideas for Future Cities: Intelligent, Low-Carbon and Healthy)
Open AccessCorrection
Correction: Chaparro et al. Whey as an Alternative Nutrient Medium for Growth of Sporosarcina pasteurii and Its Effect on CaCO3 Polymorphism and Fly Ash Bioconsolidation. Materials 2021, 14, 2470
by
Sandra Chaparro, Hugo A. Rojas, Gerardo Caicedo, Gustavo Romanelli, Antonio Pineda, Rafael Luque and José J. Martínez
Materials 2024, 17(11), 2781; https://doi.org/10.3390/ma17112781 - 6 Jun 2024
Abstract
►▼
Show Figures
The Editorial Office was made aware of an error in Figure S1 within the original publication [...]
Full article
Figure 1
Open AccessArticle
TaF4: A Novel Two-Dimensional Antiferromagnetic Material with a High Néel Temperature Investigated Using First-Principles Calculations
by
Jia Luo, Qingkai Zhang, Jindong Lin, Yuxiang Ni, Hongyan Wang, Yongliang Tang and Mu Lan
Materials 2024, 17(11), 2780; https://doi.org/10.3390/ma17112780 - 6 Jun 2024
Abstract
The structural, electronic, and magnetic properties of a novel two-dimensional monolayer material, TaF4, are investigated using first-principles calculations. The dynamical and thermal stabilities of two-dimensional monolayer TaF4 were confirmed using its phonon dispersion spectrum and molecular dynamics calculations. The band
[...] Read more.
The structural, electronic, and magnetic properties of a novel two-dimensional monolayer material, TaF4, are investigated using first-principles calculations. The dynamical and thermal stabilities of two-dimensional monolayer TaF4 were confirmed using its phonon dispersion spectrum and molecular dynamics calculations. The band structure obtained via the high-accuracy HSE06 (Heyd–Scuseria–Ernzerhof 2006) functional theory revealed that monolayer two-dimensional TaF4 is an indirect bandgap semiconductor with a bandgap width of 2.58 eV. By extracting the exchange interaction intensities and magnetocrystalline anisotropy energy in a J1-J2-J3-K Heisenberg model, it was found that two-dimensional monolayer TaF4 possesses a Néel-type antiferromagnetic ground state and has a relatively high Néel temperature (208 K) and strong magnetocrystalline anisotropy energy (2.06 meV). These results are verified via the magnon spectrum.
Full article
(This article belongs to the Special Issue Electronic, Optical and Magnetic Properties of Low-Dimensional Materials)
►▼
Show Figures
Figure 1
Open AccessReview
Material Extrusion Additive Manufacturing of Ceramics: A Review on Filament-Based Process
by
Roberto Spina and Luigi Morfini
Materials 2024, 17(11), 2779; https://doi.org/10.3390/ma17112779 - 6 Jun 2024
Abstract
Additive manufacturing is very important due to its potential to build components and products using high-performance materials. The filament-based 3D printing of ceramics is investigated, revealing significant developments and advancements in ceramic material extrusion technology in recent years. Researchers employ several typologies of
[...] Read more.
Additive manufacturing is very important due to its potential to build components and products using high-performance materials. The filament-based 3D printing of ceramics is investigated, revealing significant developments and advancements in ceramic material extrusion technology in recent years. Researchers employ several typologies of ceramics and binders to achieve fully dense products. The design of the filament and the necessary technological adaptations for 3D printing are fully investigated. From a material perspective, this paper reviews and analyzes the recent developments in additive manufacturing of material-extruded ceramics products, pointing out the performance and properties achieved with different material-binder combinations. The main gaps to be filled and recommendations for future developments in this field are reported.
Full article
(This article belongs to the Special Issue Advances in 3D Printing/Additive Manufacturing Technology of Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Exploring In Vivo Pulmonary and Splenic Toxicity Profiles of Silicon Quantum Dots in Mice
by
Roxana-Elena Cristian, Cornel Balta, Hildegard Herman, Alina Ciceu, Bogdan Trica, Beatrice G. Sbarcea, Eftimie Miutescu, Anca Hermenean, Anca Dinischiotu and Miruna S. Stan
Materials 2024, 17(11), 2778; https://doi.org/10.3390/ma17112778 - 6 Jun 2024
Abstract
Silicon-based quantum dots (SiQDs) represent a special class of nanoparticles due to their low toxicity and easily modifiable surface properties. For this reason, they are used in applications such as bioimaging, fluorescent labeling, drug delivery, protein detection techniques, and tissue engineering despite a
[...] Read more.
Silicon-based quantum dots (SiQDs) represent a special class of nanoparticles due to their low toxicity and easily modifiable surface properties. For this reason, they are used in applications such as bioimaging, fluorescent labeling, drug delivery, protein detection techniques, and tissue engineering despite a serious lack of information on possible in vivo effects. The present study aimed to characterize and evaluate the in vivo toxicity of SiQDs obtained by laser ablation in the lung and spleen of mice. The particles were administered in three different doses (1, 10, and 100 mg QDs/kg of body weight) by intravenous injection into the caudal vein of Swiss mice. After 1, 6, 24, and 72 h, the animals were euthanized, and the lung and spleen tissues were harvested for the evaluation of antioxidant enzyme activity, lipid peroxidation, protein expression, and epigenetic and morphological changes. The obtained results highlighted a low toxicity in pulmonary and splenic tissues for concentrations up to 10 mg SiQDs/kg body, demonstrated by biochemical and histopathological analysis. Therefore, our study brings new experimental evidence on the biocompatibility of this type of QD, suggesting the possibility of expanding research on the biomedical applications of SiQDs.
Full article
(This article belongs to the Special Issue Development and Biomedical Applications of Optoelectronic Nanomaterials)
Open AccessArticle
Mechanical Properties of Alkasite Material with Different Curing Modes and Simulated Aging Conditions
by
Visnja Negovetic Mandic, Laura Plancak, Danijela Marovic, Zrinka Tarle, Milena Trutina Gavran and Matej Par
Materials 2024, 17(11), 2777; https://doi.org/10.3390/ma17112777 - 6 Jun 2024
Abstract
►▼
Show Figures
This study aimed to evaluate the micro-mechanical and macro-mechanical properties of self-cured and light-cured alkasite and to investigate how accelerated degradation in acidic, alkaline, and ethanol solutions affects the macro-mechanical properties of self-cured and light-cured alkasite. The specimens of the alkasite material (Cention
[...] Read more.
This study aimed to evaluate the micro-mechanical and macro-mechanical properties of self-cured and light-cured alkasite and to investigate how accelerated degradation in acidic, alkaline, and ethanol solutions affects the macro-mechanical properties of self-cured and light-cured alkasite. The specimens of the alkasite material (Cention Forte, Ivoclar Vivadent) were prepared according to the following three curing modes: (1) light-cured immediately, (2) light-cured after a 5-min delay, and (3) self-cured. Microhardness was tested before and after immersion in absolute ethanol to indirectly determine crosslink density, while flexural strength and flexural modulus were measured using a three-point bending test after accelerated aging in the following solutions: (1) lactic acid solution (pH = 4.0), (2) NaOH solution (pH = 13.0), (3) phosphate-buffered saline solution (pH = 7.4), and (4) 75% ethanol solution. The data were statistically analyzed using a two-way ANOVA and Tukey post hoc test. The results showed that the microhardness, flexural strength, and flexural modulus were significantly lower in self-cured specimens compared to light-cured specimens. A 5-min delay between the extrusion of the material from the capsule and light curing had no significant effect on any of the measured properties. A significant effect of the accelerated aging solutions on macro-mechanical properties was observed, with ethanol and alkaline solutions having a particularly detrimental effect. In conclusion, light curing was preferable to self-curing, as it resulted in significantly better micro- and macro-mechanical properties, while a 5-min delay between mixing the capsule and light curing had no negative effects.
Full article
Figure 1
Open AccessArticle
Thermophysical Properties of FUNaK (NaF-KF-UF4) Eutectics
by
Maxime Fache, Laura Voigt, Jean-Yves Colle, John Hald and Ondřej Beneš
Materials 2024, 17(11), 2776; https://doi.org/10.3390/ma17112776 - 6 Jun 2024
Abstract
General interest in the deployment of molten salt reactors (MSRs) is growing, while the available data on uranium-containing fuel salt candidates remains scarce. Thermophysical data are one of the key parameters for reactor design and understanding reactor operability. Hence, filling in the gap
[...] Read more.
General interest in the deployment of molten salt reactors (MSRs) is growing, while the available data on uranium-containing fuel salt candidates remains scarce. Thermophysical data are one of the key parameters for reactor design and understanding reactor operability. Hence, filling in the gap of the missing data is crucial to allow for the advancement of MSRs. This study provides novel data for two eutectic compositions within the NaF-KF-UF4 ternary system which serve as potential fuel candidates for MSRs. Experimental measurements include their melting point, density, fusion enthalpy, and vapor pressure. Additionally, their boiling point was extrapolated from the vapor pressure data, which were, at the same time, used to determine the enthalpy of vaporization. The obtained thermodynamic values were compared with available data from the literature but also with results from thermochemical equilibrium calculations using the JRCMSD database, finding a good correlation, which thus contributed to database validation. Preliminary thoughts on fluoride salt reactor operability based on the obtained results are discussed in this study.
Full article
(This article belongs to the Special Issue Recent Advances in Materials for Molten Salt Nuclear Reactor Technology)
►▼
Show Figures
Figure 1
Open AccessArticle
Experimental Analysis of Effect of Machined Material on Cutting Forces during Drilling
by
Josef Sklenička, Jan Hnátík, Jaroslava Fulemová, Miroslav Gombár, Alena Vagaská and Aneta Jirásko
Materials 2024, 17(11), 2775; https://doi.org/10.3390/ma17112775 - 6 Jun 2024
Abstract
Current research studies devoted to cutting forces in drilling are oriented toward predictive model development, however, in the case of mechanistic models, the material effect on the drilling process itself is mostly not considered. This research study aims to experimentally analyze how the
[...] Read more.
Current research studies devoted to cutting forces in drilling are oriented toward predictive model development, however, in the case of mechanistic models, the material effect on the drilling process itself is mostly not considered. This research study aims to experimentally analyze how the machined material affects the feed force (Ff) during drilling, alongside developing predictive mathematical–statistical models to understand the main effects and interactions of the considered technological and tool factors on Ff. By conducting experiments involving six factors (feed, cutting speed, drill diameter, point angle, lip relief angle, and helix angle) at five levels, the drilling process of stainless steel AISI1045 and case-hardened steel 16MnCr5 is executed to validate the numerical accuracy of the established prediction models (AdjR = 99.600% for C45 and AdjR = 97.912% for 16MnCr5). The statistical evaluation (ANOVA, RSM, and Lack of Fit) of the data proves that the drilled material affects the Ff value at the level of 17.600% (p < 0.000). The effect of feed represents 44.867% in C45 and 34.087% in 16MnCr5; the cutting speed is significant when machining C45 steel only (9.109%). When machining 16MnCr5 compared to C45 steel, the influence of the point angle (lip relief angle) is lower by 49.198% (by 22.509%). The effect of the helix angle is 163.060% higher when machining 16MnCr5.
Full article
(This article belongs to the Special Issue Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels, 2nd Edition)
►▼
Show Figures
Figure 1
Open AccessReview
Encapsulation of Active Substances in Natural Polymer Coatings
by
Emma Akpo, Camille Colin, Aurélie Perrin, Julien Cambedouzou and David Cornu
Materials 2024, 17(11), 2774; https://doi.org/10.3390/ma17112774 - 6 Jun 2024
Abstract
Already used in the food, pharmaceutical, cosmetic, and agrochemical industries, encapsulation is a strategy used to protect active ingredients from external degradation factors and to control their release kinetics. Various encapsulation techniques have been studied, both to optimise the level of protection with
[...] Read more.
Already used in the food, pharmaceutical, cosmetic, and agrochemical industries, encapsulation is a strategy used to protect active ingredients from external degradation factors and to control their release kinetics. Various encapsulation techniques have been studied, both to optimise the level of protection with respect to the nature of the aggressor and to favour a release mechanism between diffusion of the active compounds and degradation of the barrier material. Biopolymers are of particular interest as wall materials because of their biocompatibility, biodegradability, and non-toxicity. By forming a stable hydrogel around the drug, they provide a ‘smart’ barrier whose behaviour can change in response to environmental conditions. After a comprehensive description of the concept of encapsulation and the main technologies used to achieve encapsulation, including micro- and nano-gels, the mechanisms of controlled release of active compounds are presented. A panorama of natural polymers as wall materials is then presented, highlighting the main results associated with each polymer and attempting to identify the most cost-effective and suitable methods in terms of the encapsulated drug.
Full article
(This article belongs to the Section Green Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
The Effect of Sputtering Sequence Engineering in Superlattice-like Sb-Rich-Based Phase Change Materials
by
Anding Li, Ruirui Liu, Liu Liu, Yukun Chen and Xiao Zhou
Materials 2024, 17(11), 2773; https://doi.org/10.3390/ma17112773 - 6 Jun 2024
Abstract
This paper presents a comprehensive investigation into the thermal stability of superlattice-like (SLL) thin films fabricated by varying the sputtering sequences of the SLL [Ge8Sb92(25nm)/GeTe(25nm)]1 and SLL [GeTe(25nm)/Ge8Sb92(25nm)]1 configurations. Our results reveal significantly
[...] Read more.
This paper presents a comprehensive investigation into the thermal stability of superlattice-like (SLL) thin films fabricated by varying the sputtering sequences of the SLL [Ge8Sb92(25nm)/GeTe(25nm)]1 and SLL [GeTe(25nm)/Ge8Sb92(25nm)]1 configurations. Our results reveal significantly enhanced ten-year data retention (Tten) for both thin films measured at 124.3 °C and 151.9 °C, respectively. These values surpass the Tten of Ge2Sb2Te5 (85 °C), clearly demonstrating the superior thermal stability of the studied SLL configurations. Interestingly, we also observe a distinct difference in the thermal stability between the two SLL configurations. The superior thermal stability of SLL [GeTe(25nm)/Ge8Sb92(25nm)]1 is attributed to the diffusion of the Sb precipitated phase from Ge8Sb92 to GeTe. This diffusion process effectively reduces the impact of the Sb phase on the thermal stability of the thin film. In contrast, in the case of SLL [Ge8Sb92(25nm)/GeTe(25nm)]1, the presence of the Sb precipitated phase in Ge8Sb92 facilitates the crystallization of GeTe, leading to reduced thermal stability. These findings underscore the significant influence of the sputtering sequence on the atomic behavior and thermal properties of superlattice-like phase change materials. Such insights provide a robust foundation for the design and exploration of novel phase change materials with improved thermal performance.
Full article
(This article belongs to the Topic Advances in Energy Storage Materials/Devices and Solid-State Batteries)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Nondestructive Inspection and Quantification of Select Interface Defects in Honeycomb Sandwich Panels
by
Mahsa Khademi, Daniel P. Pulipati and David A. Jack
Materials 2024, 17(11), 2772; https://doi.org/10.3390/ma17112772 - 6 Jun 2024
Abstract
Honeycomb sandwich panels are utilized in many industrial applications due to their high bending resistance relative to their weight. Defects between the core and the facesheet compromise their integrity and efficiency due to the inability to transfer loads. The material system studied in
[...] Read more.
Honeycomb sandwich panels are utilized in many industrial applications due to their high bending resistance relative to their weight. Defects between the core and the facesheet compromise their integrity and efficiency due to the inability to transfer loads. The material system studied in the present paper is a unidirectional carbon fiber composite facesheet with a honeycomb core with a variety of defects at the interface between the two material systems. Current nondestructive techniques focus on defect detectability, whereas the presented method uses high-frequency ultrasound testing (UT) to detect and quantify the defect geometry and defect type. Testing is performed using two approaches, a laboratory scale immersion tank and a novel portable UT system, both of which utilize only single-side access to the part. Coupons are presented with defects spanning from 5 to 40 mm in diameter, whereas defects in the range of 15–25 mm and smaller are considered below the detectability limits of existing inspection methods. Defect types studied include missing adhesive, unintentional foreign objects that occur during the manufacturing process, damaged core, and removed core sections. An algorithm is presented to quantify the defect perimeter. The provided results demonstrate successful defect detection, with an average defect diameter error of mm across all coupons studied in the immersion system and 1.1 mm for the portable system. The best accuracy comes from the missing adhesive coupons, with an average error of mm. Conversely, the worst results come from the missing or damaged honeycomb coupons, with an error average of 0.7 mm, well below the standard detectability levels of 15–25 mm.
Full article
(This article belongs to the Special Issue Experimental Testing, Manufacturing and Numerical Modelling of Composite and Sandwich Structures)
►▼
Show Figures
Figure 1
Open AccessArticle
Oligoester Identification in the Inner Coatings of Metallic Cans by High-Pressure Liquid Chromatography–Mass Spectrometry with Cone Voltage-Induced Fragmentation
by
Monika Beszterda-Buszczak and Rafał Frański
Materials 2024, 17(11), 2771; https://doi.org/10.3390/ma17112771 - 6 Jun 2024
Abstract
The application of polyesters as food contact materials is an alternative to epoxy resin coatings, which can be a source of endocrine migrants. By using high-pressure liquid chromatography/electrospray ionization–mass spectrometry (HPLC/ESI-MS) with cone voltage-induced fragmentation in-source, a number of polyester-derived migrants were detected
[...] Read more.
The application of polyesters as food contact materials is an alternative to epoxy resin coatings, which can be a source of endocrine migrants. By using high-pressure liquid chromatography/electrospray ionization–mass spectrometry (HPLC/ESI-MS) with cone voltage-induced fragmentation in-source, a number of polyester-derived migrants were detected in the extracts of inner coatings of metallic cans. The polyester-derived migrants were detected in each inner coating of fish product-containing cans (5/5) and in one inner coating of meat product-containing can (1/5). They were not detected in the inner coatings of vegetable/fruit product-containing cans (10 samples). The respective detected parent and product ions enabled differentiation between cyclic and linear compounds, as well as unambiguous identification of diol and diacid units. Most of the detected compounds, cyclic and linear, were composed of neopentyl glycol as diol and two diacid comonomers, namely isophthalic acid and hexahydrophthalic acid. The other detected oligoesters were composed of neopentyl glycol or propylene glycol and adipic acid/isophthalic acid as comonomers. The compounds containing propylene glycol as diol were found to be exclusively linear cooligoesters. On the basis of abundances of [M+Na]+ ions, the relative contents of cyclic and linear oligoesters were evaluated.
Full article
(This article belongs to the Special Issue Surface Technology and Coatings Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
Scalable Microwires through Thermal Drawing of Co-Extruded Liquid Metal and Thermoplastic Elastomer
by
Pranjal Khakse, Falco Dangers, Rawan Elsersawy and Mohammad Abu Hasan Khondoker
Materials 2024, 17(11), 2770; https://doi.org/10.3390/ma17112770 - 6 Jun 2024
Abstract
This article demonstrates scalable production of liquid metal (LM)-based microwires through the thermal drawing of extrudates. These extrudates were first co-extruded using a eutectic alloy of gallium and indium (EGaIn) as a core element and a thermoplastic elastomer, styrene–ethylene/butylene–styrene (SEBS), as a shell
[...] Read more.
This article demonstrates scalable production of liquid metal (LM)-based microwires through the thermal drawing of extrudates. These extrudates were first co-extruded using a eutectic alloy of gallium and indium (EGaIn) as a core element and a thermoplastic elastomer, styrene–ethylene/butylene–styrene (SEBS), as a shell material. By varying the feed speed of the co-extruded materials and the drawing speed of the extrudate, it was possible to control the dimensions of the microwires, such as core diameter and shell thickness. How the extrusion temperature affects the dimensions of the microwire was also analyzed. The smallest microwire (core diameter: 52 ± 14 μm and shell thickness: 46 ± 10 μm) was produced from a drawing speed of 300.1 mm s−1 (the maximum attainable speed of the apparatus used), SEBS extrusion speed of 1.50 mm3 s−1, and LM injection rate of 5 × 105 μL s−1 at 190 °C extrusion temperature. The same extrusion condition without thermal drawing generated significantly large extrudates with a core diameter of 278 ± 26 μm and shell thickness of 430 ± 51 μm. The electrical properties of the microwires were also characterized under different degrees of stretching and wire kinking deformation which proved that these LM-based microwires change electrical resistance as they are deformed and fully self-heal once the load is removed. Finally, the sewability of these microwires was qualitatively tested by using a manual sewing machine to pattern microwires on a traditional cotton fabric.
Full article
(This article belongs to the Special Issue Liquid Metals: From Fundamentals to Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
A Hydration Model to Evaluate the Properties of Cement–Quartz Powder Hybrid Concrete
by
Bo Yang, Yao Liu and Xiao-Yong Wang
Materials 2024, 17(11), 2769; https://doi.org/10.3390/ma17112769 - 6 Jun 2024
Abstract
Although quartz powder is a common concrete filling material, the importance and originality of this study lies in the development of a hydration model for quartz powder–cement binary mixtures and the adoption of this model to predict the development of concrete material properties.
[...] Read more.
Although quartz powder is a common concrete filling material, the importance and originality of this study lies in the development of a hydration model for quartz powder–cement binary mixtures and the adoption of this model to predict the development of concrete material properties. The purpose of this study is to use this model to promote the material design of environmentally friendly concrete and to elucidate the relationships in the development of the various properties of quartz powder concrete. The method used in this study was as follows: The parameters of the hydration model were obtained through seven days of hydration heat experiments. The hydration heat up to 28 days was also calculated, and the various properties of the concrete were predicted from the heat of hydration. The main findings of this study were as follows: (1) The ultimate hydration heat released per gram of cement for the different quartz powder substitution rates and quartz powder particle fineness was the same, at 390.145 J/g cement, as was the shape index of the hydration model at −1.003. (2) Moreover, through the model calculations, we found that, at the twenty-eighth day of the curing period for the quartz powder specimens with different quartz powder substitution amounts and different fineness, the reaction level of the cement was similar, at 0.963, as were the values of the cumulative heat of hydration, with both at 375.5 J/g cement. (3) The model showed that, in the late stage (28 days) of hydration for quartz powders of different fineness and when the substitution amount was the same, the cumulative heat of hydration over 28 days was similar. (4) The properties of concrete were evaluated using the calculated hydration heat. Overall, the predictive performance of the power and linear functions was similar, with no significant differences being found.
Full article
(This article belongs to the Section Construction and Building Materials)
►▼
Show Figures
Figure 1
Open AccessArticle
A Study on Ammonium Chloride Dendrite Tip Kinetics: The Importance of the Solid–Liquid Density Change and Interfacial Kinetics
by
Nashmi Alrasheedi, Mihaela Stefan-Kharicha, Ibrahim Sari, Mahmoud Ahmadein and Abdellah Kharicha
Materials 2024, 17(11), 2768; https://doi.org/10.3390/ma17112768 - 6 Jun 2024
Abstract
►▼
Show Figures
Ammonium chloride (NH4Cl) has been extensively studied as a transparent analogue for investigating the solidification of metals due to its distinctive properties and the simplicity of the experimentation. Furthermore, NH4Cl exhibits a striking resemblance in solidification behavior to the
[...] Read more.
Ammonium chloride (NH4Cl) has been extensively studied as a transparent analogue for investigating the solidification of metals due to its distinctive properties and the simplicity of the experimentation. Furthermore, NH4Cl exhibits a striking resemblance in solidification behavior to the majority of binary eutectic alloy systems, rendering it a valuable model for studying phase transition phenomena. Experiments conducted on ammonium chloride are frequently employed to validate numerical models for predicting grain structures, macrosegregation, and the columnar-to-equiaxed transition (CET). This latter phenomenon arises due to differences in the velocities of columnar dendrite tips and the liquidus isosurface. However, the kinetics of dendrite tip growth, as a function of supersaturation, remains poorly understood for this commonly used alloy. The objective of this study was to utilize the available experimental data in conjunction with Ivantsov correlations to shed light on the ambiguous kinetics. The results indicate that when considering the crystal–melt density ratio, the Ivantsov solution offers a good correlation. Furthermore, incorporating a moderate interfacial kinetic coefficient enhances the correlations further. This correlation can be implemented in numerical models, which will aid in the determination of the columnar front, the columnar-to-equiaxed transition, and the equiaxed growth velocities.
Full article
Figure 1
Journal Menu
► ▼ Journal Menu-
- Materials Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Society Collaborations
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Topic in
Bioengineering, JMMP, Materials, Micromachines, Polymers
Advances in Filament Engineering for Biomaterials
Topic Editors: Ming-Wei Chang, Zeeshan Ahmad, Hui-Min David WangDeadline: 30 June 2024
Topic in
Catalysts, Coatings, Crystals, Energies, Materials, Nanomaterials
Interfacial Bonding Design and Applications in Structural and Functional Materials
Topic Editors: Junlei Qi, Pengcheng Wang, Yaotian YanDeadline: 20 July 2024
Topic in
Coatings, CMD, Materials, Metals, Molecules
Corrosion and Protection of Metallic Materials, 2nd Edition
Topic Editors: Sebastian Feliú, Jr., Federico R. García-Galván, Lucien VelevaDeadline: 31 July 2024
Topic in
Atmosphere, Buildings, Materials, Remote Sensing, Sensors
Condition Perception and Performance Evaluation of Engineering Structures
Topic Editors: Jingzhou Xin, Hong Zhang, Yan Jiang, Simon X. YangDeadline: 31 August 2024
Conferences
Special Issues
Special Issue in
Materials
Structural Health Monitoring of Polymer Composites
Guest Editors: Patricia Krawczak, Salim ChakiDeadline: 10 June 2024
Special Issue in
Materials
Thermal Behavior of Polymeric and Other Advanced Materials
Guest Editors: Małgorzata Maciejewska, Magdalena RogulskaDeadline: 30 June 2024
Special Issue in
Materials
Advances in Nanomaterials and Molecules and Their Applications on Environment Recovery and Release Systems
Guest Editors: Fernando Gomes de Souza Junior, Diganta Bhusan DasDeadline: 20 July 2024
Special Issue in
Materials
Nuclear Materials Fundamentals and Applications
Guest Editors: Zhoutong He, Min Liu, Wei QiDeadline: 30 July 2024
Topical Collections
Topical Collection in
Materials
3D Printing in Medicine and Biomedical Engineering
Collection Editor: Filip Górski
Topical Collection in
Materials
Catalysts: Preparation, Catalytic Performance and Catalytic Reaction
Collection Editors: Gina Pecchi, Cristian H. Campos
Topical Collection in
Materials
Microstructure and Corrosion Behavior of Advanced Alloys
Collection Editor: Marián Palcut
Topical Collection in
Materials
Manufacturing Engineering and Mechanical Properties of Composite Materials
Collection Editor: Aminul Islam