Investigating phosphorus loads removed by chemical and biological methods in municipal wastewater treatment plants in Poland.

The article presents an analysis of the current methods for phosphorus removal applied in municipal wastewater treatment plants in Poland. Within the study, 131 wastewater treatment plants were investigated, constituting 17 630 500 population equivalent, which is about 1/3 of the overall population equivalent (designed) in Poland. The research was based on a detailed technical questionnaire analysis obtained from wastewater treatment plants operators and calculations of pure metal doses in the applied coagulants and their type per a treated wastewater volume, population equivalent and phosphorus load removed. Moreover, a basic statistical analysis based on Pearson's correlation coefficient was applied to validate the relationship between the consumption of coagulants per the removed P load and the treated wastewater volume in 3 categories of wastewater treatment plants in terms of their population equivalent. The analysis results show that a minimum of 1470 Mg of phosphorus removed by 35 wastewater treatment plants based entirely on biological treatment methods could be used for phosphorus recovery to produce struvite, calcium phosphate or other highly bioavailable alternative fertilizer products. Moreover, 1490 Mg of phosphorus removed by other 17 wastewater treatment plants with a minimal coagulant dose (<1 g of metal per m3 of wastewater), increases the base for phosphorus recovery to approx. 2960 Mg per year using sewage sludge or its dewatering liquors. These results suggest that the implementation of the means mentioned above would significantly increase the possibilities for obtaining phosphorus from secondary sources, especially in wastewater treatment plants without sewage sludge incineration plants. • Phosphorus removal methods are analyzed based on the collected questionnaires. • A minimum of 1470 Mg of P per year is removed by biological treatment exclusively. • The ratio between a pure metal dose and the volume of treated wastewater is used. • Indicators for coagulant doses are applied for 3 treatment plants capacity categories. [ABSTRACT FROM AUTHOR]