Öğütülmüş Kolemanit Dolgulu Poliamid-6.6 Kompozit Malzemesinin Tribolojik Özelliklerine Dolgu Miktarının Etkisi.
In: Conference Proceedings of the International Symposium on Innovative Technologies in Engineering & Science, 2021, S. 350-359
Konferenz
Zugriff:
In this experimental study, PA/KOL composite materials were produced by using Polyamide-6.6 (PA) material as matrix material and ground colemanite (KOL) as filling material. The variation of tribological properties of PA/KOL composite materials compared to pure PA material depending on the amount of KOL filler was investigated. For this purpose, PA/KOL composite materials granules with KOL filled at 12.5, 15, 17.5, 20 percent by weight were prepared with a twin-screw extruder and then multi-purpose test pieces were produced by injection molding method. A constant 5N load, 40 rpm drum rotation speed and 40 m sliding distance were applied to pure and composite materials without lubrication according to TS ISO 4649 standard for wear tests. Experimental results showed that the tribological properties of pure PA material and/or PA/KOL composite material are affected by the amount of KOL filler. [ABSTRACT FROM AUTHOR]
Bu deneysel çalışmada matris malzemesi olarak Poliamid-6.6 (PA) malzemesi ve dolgu malzemesi olarak da öğütülmüş kolemanit (KOL) kullanılarak oluşturulan PA/KOL kompozit malzemelerin tribolojik özelliklerinin KOL dolgu miktarına bağlı değişimi incelenmiştir. Bu kapsamda oluşturulması amaçlanan PA/KOL kompozit malzemeler için saf PA malzemesine ağırlıkça yüzde 12,5, 15, 17,5, 20 oranlarında KOL dolgusu yapılarak ilk olarak çift vidalı bir ekstrüder kullanılıp granül üretimi gerçekleştirilmiş daha sonra enjeksiyon kalıplama yöntemi ile çok amaçlı deney parçaları üretilmiştir. Saf ve kompozit malzemelere, TS ISO 4649 standardına göre yağlama olmaksızın sabit 5N yük, 40 d/dak tambur dönme hızı ve 40 m kayma mesafesinde aşınma testleri uygulanmıştır. Deneysel sonuçlar, saf PA malzemenin ve/veya PA/KOL kompozit malzemenin, tribolojik özelliklerinin, KOL dolgu miktarından etkilendiğini göstermiştir. [ABSTRACT FROM AUTHOR]
Titel: |
Öğütülmüş Kolemanit Dolgulu Poliamid-6.6 Kompozit Malzemesinin Tribolojik Özelliklerine Dolgu Miktarının Etkisi.
|
---|---|
Autor/in / Beteiligte Person: | Şahin, Şenol ; Metin, Furkan ; Yılmaz, Ayşegül Bodur |
Zeitschrift: | Conference Proceedings of the International Symposium on Innovative Technologies in Engineering & Science, 2021, S. 350-359 |
Quelle: | 2021, p350-359. 10p. |
Veröffentlichung: | 2021 |
Medientyp: | Konferenz |
ISSN: | 2148-7464 (print) |
DOI: | 10.33793/acperpro.04.01.52 |
Sonstiges: |
|